Traction as a specification, not an afterthought
Ramps, entrances, wash down areas and wet rooms, finished with a texture chosen for the actual hazard rather than a standard product.
Commercial work
Too little is dangerous and too much is a different problem
Slip resistance is treated as a product you add and it is really a specification you choose. How much texture a floor needs depends on what is on it, who is walking on it, what they are wearing on their feet and what they are carrying. Getting that judgement right is most of the job, and it is why we would rather look at the area than sell you a standard finish.
It is easy to make a floor grippy. It is harder to make it grippy enough for the hazard and no grippier, and overdoing it has real consequences.
A surface that is too coarse is uncomfortable underfoot, holds dirt in a way that makes cleaning harder, and in a food or animal setting can become a hygiene problem in its own right. It also wears trolley wheels and can catch a walking aid.
So the target is the actual risk. A dry warehouse aisle, a shop entrance that takes rain, a ramp, a kitchen with grease and water on the floor, and a pool surround all want genuinely different levels, and treating them the same means at least one of them is wrong.
We show up, finish on time, and get it right. No hidden fees, no surprises.
Jimmy and Justyn, Cobra EpoxyHow the texture is built
There are three ways we get traction and we use them in combination depending on the area.
The flake broadcast itself leaves relief under the topcoat, and how much of that we leave standing is a decision rather than a default. Indoors we scrape it back smoother. Outdoors and in wet areas we leave more of it.
An aggregate can be added into the topcoat, which is the most controllable method, because the grade and the loading both get chosen. This is what we use most in commercial wet areas.
And for the most aggressive requirements the whole system changes to a quartz broadcast, which is a different specification rather than an additive.
Your doors stay open. We work in sections, at night, over a weekend, around you.
Cobra Epoxy and Flake Coatings, Boyertown PAWhere it matters most
Ramps are the first one. A ramp concentrates the risk because gravity is already working against the person on it, and a wet ramp with a smooth finish is genuinely hazardous.
Entrances are the second, because rain arrives on footwear and lands in the same few meters every wet day of the year.
Then wash down areas, commercial kitchens, plant rooms, walk in coolers, pool surrounds, exterior steps and any area where a spill is routine rather than exceptional.
In a workplace this is a duty of care question as much as a comfort one, and it is worth having the specification written down for that reason alone.
Treating a floor you already have
Not every anti slip job is a new floor. If an existing coating is sound and simply too smooth for what the room turned out to be, it can often be abraded and given a new topcoat with aggregate in it, which is a fraction of the work of rebuilding the system.
Whether that is possible comes down to whether the existing coating is properly bonded. If it is lifting anywhere, adding to the top of it inherits the problem, and the honest answer is that it needs to come off.
We check that before quoting a retrofit rather than after, because it is the difference between a weekend job and a full rebuild, and finding out halfway through is bad for everybody.
What the price covers
Every one of these, every time
The build does not get trimmed to hit a number. If a slab needs more work than expected you hear about it at the walkthrough, not on the invoice.
The order the work happens in
Clear and mask first, which is why the room has to be completely empty before we arrive. A slab cannot be ground in patches around obstacles, because ground and unground areas take the coating differently and the join always shows.
Then grinding, which is the longest and dustiest stage and the one that decides whether the floor lasts. Extraction runs the whole time the machines do, both for the mess and because silica off dry ground concrete is a genuine exposure issue.
Then repair, then the base coat, then the flake broadcast by hand into the wet base until it will not take any more. Those three run together on the same day because the base has a working time and the chip has to be in before it closes.
Day two is the scrape back, the vacuum, and the polyaspartic. You can normally walk on it that evening, put things back the next day, and park on a garage floor after about three days.
On the map
Where we do this work
We run roughly fifty miles out from Boyertown, which covers Berks, Montgomery, Chester and Lehigh counties. The service areas page lists every town.
Not sure whether you are inside that? Call and ask. We would rather tell you honestly than send somebody on a two hour round trip.
Questions
Before you book
The things people ask on the phone before they book, answered the way Jimmy would answer them.
Can you make it grippier in one area?
Yes, and we do it regularly. Traction is zoned rather than uniform, so an entrance that takes rain off the street or a ramp can be finished with more texture than the rest of the room. It is the same system with a different topcoat specification in that area, and it is decided on the walkthrough.
Is it food safe?
The cured system is inert and non toxic, and these floors are used in commercial kitchens and food premises routinely. What matters more for a food setting is the detailing rather than the chemistry: coving at the walls, correct falls to drain, and a texture that stays safe with water and grease on it.
How disruptive is this to a working building?
Manageable, if it is planned properly. The floor gets divided so there is always somewhere for your stock and your people, the grinders run with extraction so dust is not going through the building, and each section comes back into use as it finishes. The scheduling is usually a bigger conversation than the coating.
Does it need resealing every few years?
No. This is not a sealer that wears off and gets reapplied, it is a bonded system with a polyaspartic wear layer on top. Day to day it wants a dust mop and the occasional wash with a neutral cleaner. Skip the wax and anything acidic and it looks after itself.
How soon can we use the floor again?
Foot traffic comes back first, usually the same evening on a section. Racking, pallet jacks and vehicles wait longer while the system hardens fully. We quote those times honestly, because reloading racking too early is how a brand new floor picks up permanent indentations under the leg plates.
How does pricing work?
Jimmy walks the space, measures it, looks at the condition of the concrete and puts real pricing in your hands. No hidden fees and no surprises later, which is a promise the company was built on. Anything we find in the slab gets raised before the work starts rather than added to the bill afterwards.
Can you extend an existing coated floor into a new area?
Yes, though it is worth being realistic about the join. We can match the blend, but a new system next to one that has had a few years of wear will read slightly differently, and there will be a line where they meet. Often the better answer is to recoat the whole area so it is one floor rather than two.
What about silica dust from the grinding?
Controlled at source, which is not optional. Dry grinding concrete without extraction throws respirable silica, and it is a genuine health exposure rather than a nuisance. Our equipment is OSHA certified and the extraction runs the whole time the grinders do. In an occupied commercial building that matters even more than it does in a garage.
Book a walkthrough
Get pricing on your anti slip floor coatings
Send the details over. Jimmy comes back inside a business day, walks the space, checks what the concrete is doing, and puts honest pricing in front of you before anything is booked.
Six counties from one shop in Boyertown, which is about as far as fifty miles reaches in this direction.
Ring (484) 942-3219 if you want an answer now, or email jfaust@cobraepoxy.com and Jimmy will come back to you. The contact page has the full details either way.
Tell us about the floor
A quick description is enough to start. Expect a call back within a business day.
More of what we coat: quartz epoxy flooring, pool deck epoxy flooring, kennel epoxy flooring. See finished floors in the gallery, read about Jimmy and Justyn, or check the towns we cover. Ready to talk? Book a walkthrough.