
Rowhome basements and city concrete
Pennsylvania third largest city, with pre war housing on a tight grid and a lot of commercial floor behind it.
Allentown slabs, honestly assessed
Allentown is the county seat and the third largest city in Pennsylvania, and the housing stock across most of it is dense pre war rowhome and twin on a tight street grid. Basements are deep, slabs are old and thin, and garages where they exist are small and usually off a rear alley.
That combination makes city work its own discipline. Moisture testing on every basement without exception, access planned rather than assumed, and the acceptance that equipment is being carried rather than driven. It also makes the results dramatic, because a coated basement in a rowhome is a genuine extra room in a house with no other way to get one.
Behind the housing there is a large amount of commercial and light industrial floor, some of it in buildings that have been repurposed several times over. Working out what is on a slab before quoting it is standard practice here rather than an exception.
City parking and access shape the day more than the floor does. A rowhome with no driveway means the van sits on the street and everything is carried, and a rear alley garage may not be reachable by vehicle at all. None of that is unusual and all of it takes time, so it goes into the quote at the walkthrough rather than becoming a surprise on the morning.
Made in the USA product. OSHA certified crew. A true lifetime warranty on residential interiors.
Cobra Epoxy and Flake Coatings, PA HIC 177204The part you cannot see afterwards
Nobody looking at a finished floor can tell whether the concrete underneath was diamond ground or acid etched. It looks identical on handover day. You find out three winters later, once, and by then the coating is coming up in sheets.
That asymmetry is the whole reason this trade has the reputation it has, and it is why we spend the largest single block of labor on the stage that is invisible in the result. Grinding, then cutting out and rebuilding every crack, divot and spalled patch, before a drop of color goes anywhere near the slab.
Customers watch it happen and it is the thing they mention afterwards. One review says every crack or divot was repaired, which is a strange thing to be remembered for and exactly the right thing.

Services here
Where to start
Everything we do is available in Allentown. These three come up the most, and the full list is here.
Basement Epoxy Flooring
Turns the coldest room in the house into one somebody would actually sit in.
Commercial Epoxy Flooring
Line marking goes under the topcoat rather than painted on to wear off.
Garage Floor Refinishing
Shot blasted or ground back until there is clean concrete to build on.
Nearby in Lehigh County: Emmaus·Macungie·Alburtis·Trexlertown·Coopersburg
The economics of catching it early
Sealing sound concrete is straightforward. Grind it, treat the joints, build the system, and nearly all of the cost is work you were always going to pay for.
Sealing damaged concrete means repairing it first. Spalled areas cut back to something solid, pits filled, broken edges rebuilt, all before a drop of coating goes on. That is genuinely skilled work and it can easily be a meaningful share of the job.
So the honest advice is unhelpful in the short term and correct in the long one. The best time to coat concrete is while it still looks like it does not need it.
On the map
Allentown is 25 miles from the shop
We are based in Boyertown and run roughly fifty miles out, so Allentown is comfortably inside the normal working radius. Local reference points around here include the Lehigh River, the downtown grid and the Route 22 corridor.
Nearby towns we also cover include Emmaus, Trexlertown, Macungie. If you are on the edge of that and not sure, call and ask rather than assuming. It costs nothing to find out.
Questions
Questions from Allentown
What people here tend to ask before they book a walkthrough.
Will a coating fix a damp basement?
No, and anybody who says it will is selling you a problem. A coating seals the top of the slab, it does not stop water arriving underneath it. If vapor is pushing up hard enough, sealing the surface traps the pressure and the coating lifts in sheets. That is why we measure before we specify, and why the honest answer is occasionally to fix the drainage first.
Can you tell why the last one failed?
Usually, and it is worth knowing because the fix differs. Coating that peels in flexible sheets with a smooth clean underside was never ground. Blisters and patches with a dusty residue underneath are moisture. Worn through to gray in the traffic lane means there was never enough material there. Send a photograph and we can often tell you before coming out.
Can you work outside our opening hours?
Yes, and for most commercial jobs that is exactly how it runs. Evenings, overnights and weekends, in sections, with a clear route through the building the whole time. It takes more planning than doing it in one go, which is why the scope goes in writing before anything starts.
Can it be done in one visit?
The two days are usually consecutive, so it is one visit in practical terms. Day one is grinding, repair, base coat and the broadcast. Day two is the scrape back and the topcoat. Where a basement is very large or very cut up we will sometimes split it into halves, and we will tell you that at the walkthrough rather than on the day.
Do you charge extra for distance?
Not within the normal radius, no. At the far edge, and for a genuinely small single item, we will have an honest conversation about whether the trip stands up on its own or whether it is better paired with something else nearby. What we will not do is quietly price the drive in and hope it goes unnoticed.
Will the price change once you start?
It should not, and that is the whole point of doing the walkthrough properly. Jimmy looks at the slab before quoting, so repairs are already in the number you are given. If something genuinely unexpected turns up once the old surface is off, you hear about it before we carry on, not on the invoice.
What is the current lead time?
It moves with the season, so the answer you get on the phone is the real one rather than a standard line. Winter is generally the easiest time to get an interior floor booked because the outdoor calendar is closed. Spring and early summer are the tightest, mostly because of deck and patio work.
Can I see what is going on my floor?
Yes. Ask at the walkthrough and Jimmy will tell you the actual products, base and topcoat, and you are welcome to look them up. Anyone who is cagey about naming what they are putting down is worth being cautious about, because the product is not the secret. The preparation is where the work is.
Book a walkthrough
Book a walkthrough in Allentown
Let us know what the space is and what the concrete looks like now. Jimmy will call inside a business day and arrange to see it.
Made in the USA product, OSHA certified crew, PA HIC 177204, and a true lifetime warranty on residential interior floors.
Ring (484) 942-3219 if you want an answer now, or email jfaust@cobraepoxy.com and Jimmy will come back to you. The contact page has the full details either way.
Tell us about the floor
A quick description is enough to start. Expect a call back within a business day.
Allentown sits in Lehigh County, one of four counties on our patch. See the full service area, browse what we coat, look through the gallery, or get in touch.